The PHANTOM ⛏️Toothpick ⛏️

Its like a 65mm Toothpick but bigger but is bigger better?

The PHANTOM is a mini freestyle quad supporting either 65mm or 2.5inch propellers on GR1103 8000kv motors. The build can either run on a 2S 450mah or 3S 300mah lipo.
The 16x16mm stack comes complete with:

  • F4 FC
  • 12A 4in1 ESC
  • 200mW VTX

You can either buy :
PNP (Plug and Play) and add your own Receiver.
BNF ( Bind and Fly) fitted with an Frsky XM+ Receiver.

Just remember this is a toothpick build and the lighter the better.

See below for a full list of the specifications:

  • Name: PHANTOM
  • FC:STM32F411
  • ESC:12A(BLheli_S)
  • Motor: GEPRC GEP-GR1103 8000KV(3S 300mAh) or 5500KV(4S 300-450mAh)
  • Wheelbase: 125mm
  • Propeller: 65mm or 2.5inch
  • VTX:5.8g 200mW
  • Camera:Caddx EOS2
  • Weight: 51g (without battery)

STABLE F411 Flight Controller(16*16mm)

  • MCU: STM32F411
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BEC Output: 5V@2A
  • Size: 21mm*21mm
  • Mounting holes: 16mm*16mm
  • Integrated LC Filter
  • Input voltage 2-4S LIPO
  • Firmware target: MATEKF411
  • Weight: 2.5g

STABLE F411 BLheli_S 4IN1 12A ESC(16*16mm)

  • MCU: BB21F16G
  • Continuous current: 12A
  • Input voltage : 2-4S LIPO
  • ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
  • Size: 23mm*21mm
  • Mounting hole 16*16mm
  • Firmware target: Blheli_S G_H_30
  • Current meter: 210
  • Weight: 2.7g

STABLE F411 VTX 5.8G 200mW(16*16mm)

  • Power : PIT/25/100/200mW
  • Antenna interface : IPEX (UFL)
  • Telemetry: IRC Tramp
  • Size: 17mm*27mm
  • Mounting holes: 16*16mm
  • Integrated LC Filter
  • Weight: 1.6g

Summary

This little guy in small, light and fun to fly so whether your looking for a first time buy and what to start with something small or looking to add something fun to your fleet.
The Phantom could be for you?